TITANIUM CITY

These are the titanium rod we produce to make 3D printing titanium powder. My guys is inspecting and packing the titanium rods.If you want these titanium rods, please call me at + 86 18233422513 or email me elson@cynfm.com. #titanium #titaniumbar #3Dprinting

  In recent years, with the development of marine development and the development of the ship industry, the requirements for ship materials have become higher and higher.  Therefore, materials with excellent strength, plasticity, toughness and good welding performance have been favored.  Titanium and titanium alloys  have good comprehensive mechanical and physical and chemical properties such as low density, high specific strength, corrosion resistance, heat resistance, low temperature performance, and non-magnetic properties. They have been widely used in aerospace, biomedical, marine and other fields. There have been earlier studies on titanium alloys for ships and ships abroad, and many successful applications have been obtained in high-end weapons and equipment. The domestic research on corrosion-resistant alloys is relatively late. Luoyang 725 Research Institute has developed Ti80 alloys and Ti80 alloys through composition design. The nominal composition is Ti-6...

  What are the applications of titanium in automotive industry? In recent years, with the development of the automobile industry, the world's automobile production and ownership have increased rapidly. Automobiles and lightweight are effective measures to achieve the above goals. There are two main ways to achieve automobile lightweight: one is to optimize the frame structure of the automobile; the other is to use lightweight materials in automobile manufacturing. At present, the light alloys used in automobiles mainly include metals such as aluminum, magnesium, and titanium alloys. → https://www.cynfm.com/info/what-are-the-applications-of-titanium-in-autom-54908937.html

  Free forging is mainly used for the primary processing of   astm b381 titanium forgings   ingots, that is, to manufacture semi-finished bar products with round wearing surface, square section or rectangular section. When free forging is more economical than die forging in single piece or small batch production, free forging is usually used to produce large-size blanks. From ingot to finished bar, the forging process is usually divided into three stages. 1. Billet When the initial forging (blooming) temperature is 150-250 ℃ above the β transition point, the plasticity of the casting structure is the best. At the beginning, the ingot should be deformed by light and fast striking until the primary coarse grain structure is broken. The deformation degree must be kept in the range of 20% - 30%. The ingot is forged into the required section, and then cut into a fixed size blank. The plasticity increases after the casting structure is broken. The aggregation recrystallization ...

https://www.bjcxtitanium.com/

https://www.bjcxtitanium.com/